This picnic table is designed to be simple, sturdy, and easy to build. The wide tabletop is made from 2×8″ wooden slats with 1/2″ gaps in between, giving it a clean look while allowing the wood to expand naturally. Strong 2×4 runners and solid leg braces keep everything stable, and the benches are securely supported so they feel comfortable and reliable to sit on. The whole design uses standard lumber and hardware, making it a practical project for anyone who enjoys woodworking.
Parts List
A complete breakdown of every piece that makes up the table.
Material List
All the lumber material pieces you’ll need for the build.
RCL1001 – QTY: 3
2″X8″X12FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1005 – QTY: 2
2″X6″X10FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1007 – QTY: 1
2″X8″X8FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1006 – QTY: 1
2″X8″X10FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1011 – QTY: 1
2″X4″X8FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1012 – QTY: 1
2″X4″X6FT PRESSURE TREATED YELLOW PINE LUMBER
RCL1009 – QTY: 1
2″X6″X8FT PRESSURE TREATED YELLOW PINE LUMBER
Assembly Guide
Step 1
Lay the 2X8X71.5″ TABLE TOP LUMBER SLATS flat with 1/2″ gap between each.
Step 2
Three 2X4X29.5″ TABLE TOP SUPPORT on top of the 2X8X71.5″ TABLE TOP LUMBER.
One in the middle and the other two are 7 inches away from the edges.
Four #8 X 2 1/2″ DECK SCREWS on each slats as shown here.
Step 3
Three 2X8X29.5″ LEG SUPPORT is screwed to the 2X4X29.5″ TABLE TOP SUPPORT.
Two on both sides as shown in the picture.
Three #8 X 3″ DECK SCREWS on each slats as shown here.
Step 4
Attach TABLE LEGS and BENCH SUPPORT as shown in the picture.
Fasten using sets of Carriage Bolt, Washer and Nut between each slats (See drawing for specifications).
Step 5
The BENCH SLATS and the 2X4X9″ SUPPORTS to be screws as shown in the picture.
Use #8 X 3″ & #8 x 2 1/2″ Screws as per the assembly drawing.
Step 6
Two 2X6X28.375″ TABLE BRACEs are screwed to the center TABLE SUPPORT to the BENCH SUPPORT. You may have to grind to make it fit.
Building this picnic table is easier than it looks, and the end result is a sturdy, reliable spot to sit, eat, and enjoy the outdoors. With the parts and materials listed above, you have everything you need to get started. Whether it’s a weekend project or a longer DIY adventure, this table is built to last and ready to become part of your backyard memories.